LINKD Wavtech 2-channel line driver / line output converter
When upgrading your audio system, a good clean signal is critical. The linkD is a versatile little box with a dual personality. First, it is an active, high output/ low impedance line output convertor (LOC). It was designed to work well with high power factory audio systems. It also functions as a high output voltage line driver, delivering over 10V RMS of output at less than 50ohms. If these numbers don't mean anything to you that's ok, they are really good.
It features auto turn-on via DC-offset or Audio Signal Detect. This allows the unit to turn on without the need of a remote wire, and even generates a +12V output to turn on the amplifier or other aftermarket devices in your system,. This makes it a great choice for upgrading an OEM audio system.
- 2-Channel line driver or line output converter (LOC)
- Differential balanced inputs
- Low impedance outputs
- Variable gain adjustments with clip LEDs
- Auto-turn on via DC-offset or audio signal detect
- Generated +12V remote output
- OEM load detect compatible
- Selectable ground isolation
- Locking detachable power/speaker terminals
- Professional grade panel mount RCAs
- Compact aluminium chassis with detachable mounting tabs
- OUTPUT VOLTAGE (MAX): >10VRMS
- OUTPUT IMPEDANCE: <50OHM
- INPUT SENSITIVITY:
- SPK: 2-20VRMS, 4-40VRMS
- RCA: 0.5-5VRMS
- MAX INPUT VOLTAGE (SPK): 40VRMS
- FREQUENCY RESPONSE: <10Hz - >100kHz
- THD+N SPK/RCA: <0.1% / <0.01%
- S/N SPK/RCA: >112dBA / >115dBA
- TURN-ON TRIGGER: +12V, DC-OFFSET & AUDIO DETECT
- GENERATED +12V OUTPUT: >500mA
- CHASSIS DIMENSIONS: 29x75x71mm